Skil 3100 Bedienungsanleitung PDF herunterladen (Seite 7)

ake sure X-Bench is not plugged in and

ain outlet is off.

8. Power Switch

The female plug is located on the bottom of the switch and the

ale plug is located on the side of the switch box (Fig. 11).

onnect the switch box to an electrical outlet by using an

xtension cord. Plug the desired tool into the female plug and

turn the switch box for power on by raising the tab. Power is

now activated to the tool that is plugged into the switch box.

o deactivate the power, the user can push the bump off

witch located on the front of the switch box. When leaving the

workstation it is recommended that the user removes the lock off

key, to prevent unauthorized usage. (15 A maximum use for

switch box.)

9. Folding the Unit for Storage/Transportation

Position the table on its side or inverted and compress all four

legs to the zero position (Fig. 12)

b. To place the legs inside of the table, the user must press the

lock-pin located in the middle of the leg brace and pull on the

brace (Fig. 13).

he brace and leg can now be folded into the table. Follow this

tep for each of the legs.

Keep hands clear of the pivot areas when folding

the legs inward as this can cause pinching.

c. Once all the legs are inside the table, unlock the table by

turning the main knob to keep unlocked. See Section

1a for

more details. While the table is unlocked, this will allow the user

to fold the table in half.

Keep hands and other body parts from

folding area.

Pinch points may occur during this

tep.

d. Once the table is folded in half, the knob must be turned back

o the locked position. See Section

or more details. If this

step is not done, the table can open while the user is carrying

the product.

Accessory Installation

(Each Insert and Tool Sold separately)

10. Downdraft Table (Sold Separately)

Unlock the blank universal insert plate by releasing the latch

in the front and remove the plate (Fig.14).

b. Place downdraft table over the opening by placing the back

end into the open area first.

c. The downdraft table should be seated flush against the table

(Fig. 15).

d. Lock the latch of the downdraft table. If the latch cannot be

locked, the table is not seated correctly. Re-position and lock.

Fig. 13

Fig. 12

Push pin and pull on brace

to release.

Fig. 11

WARNING

Fig. 14

Fig. 15

Extension

Cords

Tools

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Skil 3100 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorsägen Skil 3100