Skil 0780 AT Bedienerhandbuch PDF herunterladen (Seite 9)



Chain saw 0780

INTRODUCTION

• The power tool is intended for sawing wood such as

wooden beams, planks, branches, tree trunks, etc.,

and for sawing of trees; cuts can be sawed with or

across the grain

• This tool is not intended for professional use

• Check whether the packaging contains all parts as

illustrated in drawing 2

• When parts are missing or damaged, please contact

your dealer

• Read this instruction manual carefully before use

and save it for future reference 3

• Pay special attention to the safety instructions and

warnings; failure to follow these may result in

serious injury

TECHNICAL SPECIFICATIONS 1

TOOL ELEMENTS 2

A Cover plate

B Locking knob

C Chain

D Chain bar

E Symbol for rotation and cutting direction

F Drive sprocket

G Fastening bolt

H Guide ns for chain bar

J Chain tensioning peg

K Chain tensioning knob

L Oil outlet

M Oil reservoir cap

N Minimum mark

P Cord restraint

Q Safety switch

R Trigger switch

S Activation lever for kickback brake (hand guard)

T Front handle

U Rear handle

V Metal gripping teeth

W Ventilation slots

X Chain guard

Y Storage rail (screws not supplied)

Z Storage hook

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shoc k, fire and/or serious injury.

Save all warnings and instructions for future

reference. The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk

of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in

personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 203 204

Kommentare zu diesen Handbüchern

Keine Kommentare

Skil 0780 AT Bedienerhandbuch Seite 9

Kommentare zu diesen Handbüchern